NB! Strømforsyning ikke inkludert. Se tilbehør for kompatibel vare
Designed to allow custom programming, tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements.
When combined with a Redback A 1708 timer it can play announcements at prescribed times for in-store advertising and customer notification.
It allows playback of custom MP3 tracks plus standard alert and evacuation tones. A library of commonly used tones, messages and phrases are provided on a Micro Secure Digital (SD) memory card. Custom MP3 tones, music etc may be added as desired. The micro SD card is preloaded with standard tones, including bell, bing bong, siren and pre announcement chime, plus Australian Standard alert and evacuation tones (complying to AS1670.4). To comply with Australian Standards for evacuation tones, a custom message may be played after every fourth cycle providing evacuation instructions to occupants. Alert tones can be automatically switched to evacuation tones after a set period (adjustable between 30 and 240 seconds).
Playback for each track can be activated by a closing set of contacts. Contacts may be configured between alternate or momentary action. This can include or exclude alert & evacuation tones as desired. Cancel contacts are provided to stop playback of tracks. Playback can also be manually triggered by front panel switches (if activated via the DIP settings on the rear panel). 9-24V DC switched output which is activated when any message is active (the switched output is dependent on the input voltage).
Features
Allow for up to 8 custom tracks
Inbuilt tone & phrase library
9-24V @ 300mA DC operation
Micro SD card included
Terminations via screw terminals
Tones conform to Australian standard
Provision for voice over in evac mode
Stylish 1RU chassis
A 1720A PCB size 120 x 70mm
Includes Power Supply
Specifications
Power supply: 12VDC to 30VDC 300mA (idle/maximum current draw 150mA) tip positive
Output: Stereo RCA 500mV nominal
MP3 File Format:128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo (even better as mono)
SD card size: 256MB to 16GB
Trigger activation: Closing contact
Switched output: 12-30VDC out (supply voltage dependant)
*Specifications are subject to change without notice.
Rack Mounting
To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
100% developed, designed & assembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics.